House Square Footage Calculator
Find the square footage of a house or apartment: add the rooms of each floor, and see what counts as finished living area.
-
Area
Total area
—sq ft
- Sq meters
- —
- Sq yards
- —
- Acres
- —
- Sq inches
- —
Type the measurements. The total and the sketch update as you type.
Materials, waste and cost
Short answer: For a quick total, multiply the length and width of each room and add them up. The figure appraisers use in the US measures each finished floor from the outside walls (the ANSI Z765 standard), counts only finished space with ceilings of at least 7 ft, and leaves out garages, unfinished areas and open space above a two-story room.
Quick method: add up the rooms
Name each room in the calculator (Kitchen, Bedroom 1…) and enter its length and width. Add hallways, closets and bathrooms too. Inside measurements leave out the thickness of the walls, so this total is a little smaller than the official one.
What counts: the ANSI Z765 standard
ANSI Z765 is the American standard for measuring single-family homes. Fannie Mae and Freddie Mac require it for appraisals. In short:
- Each floor is measured from the outside of the exterior walls, to the nearest inch or tenth of a foot, and the total is reported to the nearest square foot.
- Only finished area counts: walls, floors and ceilings finished like the rest of the house, and reachable from the house.
- Ceilings must be at least 7 ft high (6 ft 4 in under beams and ducts). Where the ceiling slopes, at least half of the room must be 7 ft or higher, and no part lower than 5 ft is counted.
- Above-grade and below-grade (basement) area are reported separately; a finished basement is not part of the above-grade living area.
- Garages, unfinished rooms and openings to the floor below, such as the space above a two-story foyer, are not counted.
This is a summary. Appraisers work from the standard itself.
Why your number differs from the listing
Listings and tax records may measure differently: outside versus inside walls, a finished basement included or not, an old addition never recorded. If the number matters, for a sale or an appeal, ask an appraiser to measure.
Finding the square footage of a house by address
This calculator cannot look up an address. The county assessor or property appraiser publishes the square footage it taxes on, and listings and past appraisals often show it too.
Frequently asked questions
Does square footage include the basement?
Not in the above-grade living area. Under ANSI Z765 a finished basement is reported as separate below-grade area, and an unfinished one is not counted.
Does square footage include the garage?
No. Garages are not counted as finished living area, even when they are attached.
Is house square footage measured inside or outside?
The standard measures from the outside of the exterior walls. Adding up room measurements taken inside gives a smaller number.
Do closets, hallways and stairs count?
Finished closets and hallways count. Stairs are counted on the floor they go down from.
How do I find my house’s square footage by address?
Check the county assessor’s or property appraiser’s records, the listing or a past appraisal.
Related calculators
- Room Sizes in Square FeetHow many square feet is a 12 × 12 room? See the common sizes below, or enter any room in the calculator.
- Price per Square Foot CalculatorEnter a price or a rent and the square footage to get the price per square foot, per month and per year.
- Flooring CalculatorHow much flooring do you need? Add each room, then get the square feet to order with waste, the number of boxes and the cost.
- Roof Square Footage CalculatorMeasure the roof from the ground: enter the footprint with the overhangs and the pitch, and get the roof area, squares and bundles.
Updated . Every formula, constant and source: methodology.